2G Transmitter

2G Transmitter

VBS-HDIP-408A (Standard) Download PDF
VBS-HDIP-408POE (PoE) Download PDF
VBS-HDIP-439A (Rackmount) Download PDF

Replace with: VBS-HDIP-705POE

  • Encodes up to 1080p resolution source device into IP & sends over the network.
  • Stereo or Multi-channel audio supported
  • Built-in video wall support
  • 3D Support
  • Integrated RS232 port for distributed remote control
  • Image PUSH, PULL and FREEZE supported
  • OSD messaging
2G+ Transmitter

2G+ Transmitter

VBS-HDIP-418A (Standard) Download PDF 
VBS-HDIP-418POE (PoE) Download PDF
VBS-HDIP-449A (Rackmount) Download PDF

Replace with: VBS-HDIP-715POE

  • Encodes up to 1080p resolution source device into IP & sends over the network.
  • USB 2.0 over IP for KVM
  • Stereo audio extractor with adjustable Audio Delay (up to 170 ms)
  • HDMI pass-through on transmitter
  • One-way CEC Control
  • Locking HDMI cables
  • Built-in RS-232 Null Modem
2G+ AVPro Transmitter (VBS-HDMI-418AVP)

2G+ AVPro Transmitter

VBS-HDIP-418AVP (PoE) Download PDF

Replace with: VBS-HDIP-718AVP

  • Encodes up to 1080p resolution source device into IP & sends over the network.
  • Dolby Digital Sound Processor: allows simultaneous Stereo and Multi-Channel audio to be sent from an HDMI source, letting you deliver two audio formats simultaneously to different zones.
  • Line- and Mic-In ports on Transmitter: can be mixed with an with HDMI audio signal
  • Audio Amplifier and Ground Loop Isolator on Stereo Audio extractor
  • 2-way CEC Control
2G+ HDI-SDI Transmitter

2G+ HD-SDI to HDMI Transmitter

VBS-HDIP-428A (Standard) Download PDF
VBS-HDIP-428POE (PoE) Download PDF

  • Encodes up to 1080p resolution source SDI device into IP & sends over the network.
  • Support for SD-/HD-/3G-SDI formats
  • Stereo output with audio delay
  • Local HDMI Loopout
  • Null Modem-integrated RS232
  • Fully compatible with all 2G and 2G+AVPro models and viewable on any Just Add Power receiver
2G+4+ Video Tiling Processor (VBS-HDMI-459A)

2G+4+ Video Tiling Processor

VBS-HDIP-459A (Rackmount) Download PDF

  • Tiles up to four Full HD 1080p source devices on a single screen.
  • Variety of viewing modes: quad view, picture in a picture etc.
  • Any source connected to a Just Add Power transmitter can be tiled by the 2G+4+ tiler
  • Any screen with a Just Add Power receiver behind it can display the tiled image
  • Works on Just Add Power video walls
  • Supports max resolution of Full HD 1080p
2G Receiver

2G Receiver

VBS-HDIP-208A (Standard) Download PDF
VBS-HDIP-208POE (PoE) Download PDF

Replace with: VBS-HDIP-505POE

  • Full HD 1080p video supported
  • Decodes a 1080p source device for viewing on a display.
  • Stereo or Multi-channel audio supported
  • Built-in video wall support
  • 3D Support
  • Integrated RS232 port for distributed remote control
  • Instant switching between same resolution sources
  • Image PUSH, PULL and FREEZE supported
  • OSD messaging
2G+ Receiver

2G+ Receiver

VBS-HDIP-218A (Standard) Download PDF 
VBS-HDIP-218POE (PoE) Download PDF

Replace with: VBS-HDIP-515POE

  • Full HD 1080p video supported
  • USB 2.0 over IP for KVM
  • Stereo audio extractor with adjustable Audio Delay (up to 170 ms)
  • One-way CEC Control
  • Locking HDMI cables
  • Built-in RS-232 Null Modem
2G+ AVPro PoE Receiver (VBS-HDMI-218AVP)

2G+ AVPro PoE Receiver

VBS-HDIP-218AVP (PoE) Download PDF

Replace with: VBS-HDIP-515POE

  • Full HD 1080p video supported
  • USB 2.0 over IP for KVM
  • Stereo audio output with amplifier + 170ms audio delay
  • Locking HDMI cables
  • Built-in RS-232 Null Modem
  • 2-way CEC communication