3G Transmitter

VBS-HDIP-707POE (POE) Download PDF
VBS-HDIP-747POE (Rackmount) Download PDF

• Encodes a 4K or lower source device into IP & sends over the network
• Supports HDCP 2.2
• 23 ms ultra low latency
• Image Pull
• Instant-Seamless switching
• PoE
• Supports multi-channel including high-resolution digital audio formats
• RS232 or IR* control of sources

707POE devices produced in 2021 and later are NOT compatible with 2G systems because of updated hardware. It can only be installed in 3G systems.

2G systems that need to expand should use the 705POE or 715POE instead.

3G Transmitter with Stereo Out

VBS-HDIP-708POE (POE) Download PDF

• Encodes a 4K or lower source device into IP & sends over the network
• Supports HDCP 2.2
• 23 ms ultra low latency
• Stereo audio output 3.5mm
• Image Pull
• Instant-Seamless switching
• PoE
• Supports multi-channel including high-resolution digital audio formats
• RS232 or IR* control of sources

708POE uses updated hardware that makes it INCOMPATIBLE with 2G systems. It can only be installed in 3G systems.

2G systems that need to expand should use the 705POE or 715POE instead.

3G+HIFI Transmitter

VBS-HDIP-717HIFI (POE) Download PDF

• Encodes a 4K or lower source device into IP & sends over the network
• Supports HDCP 2.2
• 23 ms ultra low latency
• Image Pull
• Instant-Seamless switching
• PoE
• Supports multi-channel including high-resolution digital audio formats
• RS232 or IR* control of sources
• Local HDMI loopout

3G+KVM TRANSMITTER

VBS-HDIP-718KVM (POE) Download PDF
VBS-HDIP-749KVM (Rackmount) Download PDF

• Encodes a 4K or lower source device into IP & sends over the network
• Supports HDCP 2.2
• 23 ms ultra low latency
• Image Pull
• Instant-Seamless switching
• Power over Ethernet
• USB 2.0
• KVM Supported
• Stereo audio output 3.5mm with adjustable delay
• RS232, IR*, and CEC control of sources
• Upgradeable add-on will enable:
  • Dolby DSP - Re-encode Dolby Digital 5.1 as Dolby Pro Logic II for HDMI distribution to both multi-channel and stereo audio zones
  • Two analog audio inputs mixable with HDMI audio
  • Add-on not currently available because of a shortage of Dolby chips

The 718KVM/749KVM replaces the discontinued 718AVP/749AVP.
To learn more about the KVM Series Click Here

3G+ Dante Sound System Transmitter

VBS-HDIP-767DSS (POE) Download PDF

• Encodes a 4K or lower source device into IP & sends over the network
• Supports HDCP 2.2
• 23 ms ultra low latency
• LPCM audio up to 8 channels
• Input HDMI audio into Dante(R) or AES67 systems
• Extract Dante or AES67 audio for distribution to any Receiver
• Local HDMI Loopout
• RS232 or IR* control of sources

3G 2-Gang Thin Wallplate Transmitter

VBS-HDIP-707WP2 (POE) Download PDF

• Encodes a 4K or lower source device into IP & sends over the network
• HDMI input
• Standard faceplate available in black or white - custom colors also available
  
• Supports HDCP 2.2
• 23 ms ultra low latency
• Image Pull
• Instant-Seamless switching
• PoE
• Supports multi-channel including high-resolution digital audio formats

3G+WP2 Wall Plate Transmitter

VBS-HDIP-717WP2 (POE) Download PDF

• Encodes a 4K or lower source device into IP & sends over the network
• HDMI, VGA, and 3.5mm Line-In Inputs
• Standard faceplate available in black or white - custom colors also available
  
• Supports HDCP 2.2
• 23 ms ultra low latency
• Image Pull
• Instant-Seamless switching
• PoE
• Supports multi-channel including high-resolution digital audio formats
• USB 2.0
• KVM Supported

3G+WP4 Wall Plate Transmitter

VBS-HDIP-718WP4 (POE) Download PDF

• Encodes a 4K or lower source device into IP & sends over the network
• HDMI, VGA, and 3.5mm Line-In Inputs
• Standard faceplate available in black or white - custom colors also available
• Supports HDCP 2.2
• 23 ms ultra low latency
• Image Pull
• Instant-Seamless switching
• PoE
• Dolby DSP - Re-encode Dolby Digital 5.1 as Dolby Pro Logic II for HDMI distribution to both multi-channel and stereo audio zones
• Two analog audio inputs mixable with HDMI audio
• Stereo audio output 3.5mm with adjustable delay
• RS232 or IR* control of sources
• CEC control of sources
• USB 2.0
• KVM Supported
• Local HDMI loopout

3G+P2P Transmitter

VBS-HDIP-709P2P (POE) Download PDF

• Designed Specifically for Point-to-Point (No Switch) Installations
• Ideal for a Single Source 4-Screen Video Wall
• Encodes a 4K or lower source device into IP
• Supports HDCP 2.2
• Supports multi-channel including high-resolution digital audio formats
• 23 ms ultra low latency
• 40 Watt PoE Injector to power up to four (4) Just Add Power 509POE Receivers
• RS232 Pass-thru for End-point control
• 10 - 16 Volts, 20 Watts minimum
• No Power Supplies are included with this device

3G Receiver

VBS-HDIP-508POE (POE) Download PDF

• Decodes a 4K or lower source device from network & converts to HDMI
• Supports HDCP 2.2
• Built-in video scaler
• Video wall
• Image Push
• Image Pull
• Instant-Seamless switching
• PoE
• Supports multi-channel including high-resolution digital audio formats
• RS232, CEC, and IR* control

3G Daisy-Chain Receiver

VBS-HDIP-509POE (POE) Download PDF

• Decodes a 4K or lower source device from network & converts to HDMI
• Supports HDCP 2.2
• Network out port for local device or extra Receivers
• Built-in video scaler
• Video wall
• Image Push
• Image Pull
• Instant-Seamless switching
• PoE
• Supports multi-channel including high-resolution digital audio formats
• RS232 or IR* control of sources

3G+AVP Receiver

VBS-HDIP-518AVP (POE) Download PDF

• Decodes a 4K or lower source device from network & converts to HDMI
• Supports HDCP 2.2
• Built-in video scaler
• Video wall
• Image Push
• Image Pull
• Instant-Seamless switching
• PoE
• Supports multi-channel including high-resolution digital audio formats
• RS232 or IR* control of sources
• CEC control of sources
• USB 2.0
• KVM Supported
• Stereo audio output 3.5mm with adjustable delay

2GΩ/3G Stereo Sound Transceiver

VBS-HDIP-ST1 (POE)Download PDF

• Stereo audio; 192kHz and 24-bit supported
• Transceiver; operates as a Transmitter OR Receiver
  • As an Transmitter, input stereo audio to play on any Receiver
  • As a Receiver, output stereo audio from any Transmitter to a speaker or amp
• Variable audio
• Power Over Ethernet (POE)
• RS232 or IR* control of endpoints

3G Warp Engine Transmitter

VBS-HDIP-737POE (POE) Download PDF

• Rotates a single 4K or lower source up to 360 degrees
• Receiver and Transmitter combined into one unit
• Receiver accepts video from any Transmitter in the system
• Transmitter outputs rotated video to any Receiver in the system

3G+4+ Video Tiling Processor

VBS-HDIP-759A (Rackmount) Download PDF

• Tiles up to four 4K or lower source devices on a single screen
• Variety of viewing modes
• Any Transmitter in the 3G system can be input to the Tiler
• Distribute Tiled video to any Receiver in the 3G system
• Additional Tilers allow for more sources on the same display

Razor Shelf Accessory Device

VBS-HDIP-RS1U Download PDF

• 19” rack shelf (black) for use with Just Add Power 2G and 3G transmitters and receivers.
• Holds up to 13 x 2G, 2G+ or 3G Transmitters or Receivers vertically.
• When holding up to 13 x 3G devices, takes up a total of 5U high of rack space.
• Ideal for those large-scale residential and commercial HDMI over IP installations where the majority of Just Add Power hardware is located in a central AV rack.

IR Dongle (a.k.a. Flux Capacitor)

VBS-HDIP-IRD Download PDF

• An RS232 to IR converter that allows for full IR control of integrated sources and displays in any 2G/2G+ or 3G Just Add Power HDMI over IP install.
• Compatible with all Just Add Power transmitters and receivers with RS232 serial ports.
• Each IR dongle comes supplied with 5V power supply or can be powered via USB port on the transmitters and receivers
• When using with 2G devices, an extra component is necessary for use which is shipped with the dongle